Analytical instruments/Analytical Instrumentation MCQ Question Set 21 Sample Test,Sample questions

Question:
 Feedback system is used to _____

1.Cancel use of temperature gradient

2.To reduce delay in measurement

3. To improve accuracy

4.None of the mentioned


Question:
 If temperature T1 of material A is equal to temperature T2 of material B, then which of the following are correct?

1.Heat flow from A to B

2. Heat flow from B to A

3.No heat flow

4.Temperature at the junction increases


Question:
 Operation of thermocouple is governed by ________

1.Peltier effect

2. Seebeck effect

3.Thomson effect

4.All of the mentioned


Question:
 Which of the following represents materials used for thickness measurement using inductive transducer?

1. Material should be magnetic in nature

2.Material should be magnetic and conducting

3.Material should be magnetic and non-conducting

4.All of the mentioned


Question:
A metal with temperature coefficient of resistance has a value 200, its initial resistance is given by 40Ω. For an increase in 300c to350c what will be the final resistance value?

1.40 KΩ

2.4 KΩ

3.40 Ω

4.400 Ω


Question:
Amount of heat liberated or absorbed when 1A current passes is called _______

1.Thomson coefficient

2.Peltier coefficient

3.Seebeck coefficient

4. None of the mentioned


Question:
Capacitive microphone is an application of ______

1.Capacitive displacement transducer

2.Capacitive moisture transducer

3.Hygrometer

4.None of the mentioned


Question:
Capacitive transducers can be used by _______

1.Measuring change in distance between plates

2.Measuring change in area of plates

3.Change in a dielectric material

4.All of the mentioned


Question:
Capacitive transducers cannot be used as strain gauges.

1.True

2.False

3.all of the above

4.None of the mentioned


Question:
Closely wound toroid coils are better than solenoid coil.

1.True

2.False

3.all of the above

4.None of the mentioned


Question:
For a material capacitance increases with _______

1.Decrease in area of plates, all other factors constant

2.Increase in distance between plates, all other factors constant

3.Decrease in distance between plates, all other factors constant

4.None of the mentioned


Question:
For thickness measurement, the material should have constant permeability and resistivity.

1. True

2.False

3.all of the above

4.None of the mentioned


Question:
Galvanometer used should be calibrated first.

1.True

2.False

3.all of the above

4.None of the mentioned


Question:
Inductive potentiometers are used to measure ________

1. Voltage

2.Current

3.Displacement

4.None of the mentioned


Question:
Internal temperature of a hot body is measured by measuring ________

1.Temperature of surrounding medium

2.Temperature of external surface

3.Direct measurement

4.Cannot measure internal temperature


Question:
Peltier effect is reverse of seebeck effect.

1.True

2. False

3.all of the above

4.None of the mentioned


Question:
Push-pull coil system is used for _____

1.Providing constant permeability

2.Minimize electromagnetic force of attraction

3. Provide immunity from external magnetic effect

4.All of the mentioned


Question:
Standardization of potentiometer is used for __________

1. Accuracy

2.Accuracy in measurement

3. Use of low voltage sources

4.None of the mentioned


Question:
Temperature gradient is a scalar quantity.

1. True

2.False

3.all of the above

4.None of the mentioned


Question:
Temperature gradient of a substance is _______

1.Positive constant

2.Negative constant

3.Zero

4.Variable


Question:
Thermistors have high stability.

1.True

2.False

3.all of the above

4.None of the mentioned


Question:
Thermistors may be in wire form.

1.True

2.False

3.all of the above

4.None of the mentioned


Question:
Thermo couple cannot be used to measure _______

1.Temperature of gas

2. Temperature of liquid

3. IR radiation

4.None of the mentioned


Question:
Thermocouple cannot used for measurement of temperature of liquid.

1.True

2. False

3.all of the above

4.None of the mentioned


Question:
Thermocouple is a ________

1.Primary device

2.Secondary transducer

3. Tertiary transducer

4.None of the mentioned


Question:
Thermometers are not possible using a capacitive transducer.

1. True

2.False

3.all of the above

4.None of the mentioned


Question:
Total seebeck effect can be found as ________

1.Total peltier effect

2.Total Thomson effect

3.Partly peltier and partly Thomson effect

4.None of the mentioned


Question:
What is the relation of temperature coefficient of resistivity on the coefficient of thermal expansion in RTD?

1.Higher

2. Lower

3.Equal

4.None of the mentioned


Question:
Which of the following can be used to measure using thermistors?

1.Very low

2.In-between 100Ω and 1MΩ

3.Greater than 1MΩ

4.None of the mentioned


Question:
Which of the following cannot be measured using potentiometer?

1.DC voltage

2.Temperature

3. Resistance

4.None of the mentioned


Question:
Which of the following device can be used for measuring relative angular displacement between two systems?

1. Tachometer

2.Synchro

3.Speedo meter

4.None of the mentioned


Question:
Which of the following device is used for calibration of a potentiometer?

1.Electrochemical cell

2.Galvanometer

3.Variable dc source

4.All of the mentioned


Question:
Which of the following device is used for measuring relative humidity?

1.Capacitive pressure transducer

2.Hygrometer

3.Capacitive strain transducer

4.Capacitive moisture transducer


Question:
Which of the following element is used as a thermocouple in nuclear reactor?

1.Boron

2.Platinum

3. Copper

4.Iron


Question:
Which of the following have high relative permittivity?

1.Bakelite

2.Marble

3.Paraffin

4.All of the mentioned


Question:
Which of the following is correct for moisture transducers?

1.Dielectric constant of pure water greater than other materials

2.Dielectric constant of pure water much less than other materials

3. Dielectric constant of pure water and of other materials are equal

4.None of the mentioned


Question:
Which of the following is correct for synchro?

1.Transformer type displacement transducer

2. Inductive type displacement transducer

3.Capacitive type displacement transducer

4.Resistive type displacement transducer


Question:
Which of the following is correct for temperature gradient?

1.Describes direction of temperature change

2.Describes rate of temperature change

3.Describes both direction and rate of temperature change

4.None of the mentioned


Question:
Which of the following is correct for the capacitive transducer?

1.Capacitive strain gauges

2.Capacitive tachometers

3.Capacitive pressure transducer

4.All of the mentioned


Question:
Which of the following is correct for thermistors?

1.Positive temperature coefficient of resistance

2.Negative temperature coefficient of resistance

3.Unpredictable temperature coefficient

4.None of the mentioned


Question:
Which of the following is correct for toroid type coils?

1.Toroid can be used for measurement of displacement

2.Toroid cannot be used for measuring displacement

3.Toroid can be used for measuring both displacement and velocity

4.None of the mentioned


Question:
Which of the following quantities cannot be measured by capacitive transducers?

1.Displacement

2.Speed

3.Moisture

4.None of the mentioned


Question:
Which of the following represents closed loop thermal control?

1.Thermistor

2.Thermostat

3. Thermocouple

4.All of the mentioned


Question:
Which of the following represents drawback of the inductive transducer for displacement measurement?

1.Act of electromagnetic force of attraction

2.Lower sensitivity

3.Requirement of large displacement

4.None of the mentioned


Question:
Which of the following represents the application of inductive transducers?

1.Displacement measurement

2.Thickness measurement

3.Both displacement and thickness measurement

4.None of the mentioned


Question:
Which of the following represents the rate of heat loss of a body?

1. Initial temperature

2.Final temperature

3.Difference in temperature between body and surrounding

4.None of the mentioned


Question:
Which of the following represents unit for temperature gradient?

1. K/m2

2. K

3.K/m

4.K/s


Question:
Which of the following true for temperature gradient?

1.Dimensional quantity

2.Dimensionless quantity

3.Unit less quantity

4.SI unit is K/m2


Question:
______ can be used as a replacement for thermocouple lead.

1.Replacement lead

2.Replica lead

3.Compensating lead

4.None of the mentioned


Question:
______ describes current flow between two junctions formed by two different metals.

1.Peltier effect

2.Thomson effect

3.Seebeck effect

4.None of the mentioned


More MCQS

  1. Analytical Instrumentation MCQ Question Set 1
  2. Analytical Instrumentation MCQ Question Set 2
  3. Analytical Instrumentation MCQ Question Set 3
  4. Analytical Instrumentation MCQ Question Set 4
  5. Analytical Instrumentation MCQ Question Set 5
  6. Analytical Instrumentation MCQ Question Set 6
  7. Analytical Instrumentation MCQ Question Set 7
  8. Analytical Instrumentation MCQ Question Set 8
  9. Analytical Instrumentation MCQ Question Set 9
  10. Analytical Instrumentation MCQ Question Set 10
  11. Analytical Instrumentation MCQ Question Set 11
  12. Analytical Instrumentation MCQ Question Set 12
  13. Analytical Instrumentation MCQ Question Set 13
  14. Analytical Instrumentation MCQ Question Set 14
  15. Analytical Instrumentation Colorimetry and Spectrometry MCQ
  16. Analytical Instrumentation MCQ Question Set 15
  17. Analytical Instrumentation MCQ Question Set 16
  18. Analytical Instrumentation MCQ Question Set 17
  19. Analytical Instrumentation MCQ Question Set 18
  20. Analytical Instrumentation MCQ Question Set 19
  21. Analytical Instrumentation MCQ Question Set 20
  22. Analytical Instrumentation MCQ Question Set 21
  23. Analytical Instrumentation MCQ Question Set 22
  24. Analytical Instrumentation MCQ Question Set 23
  25. Analytical Instrumentation MCQ Question Set 24
  26. Analytical Instrumentation MCQ Question Set 25
  27. Analytical Instrumentation MCQ Question Set 26
  28. Analytical Instrumentation MCQ Question Set 27
  29. Analytical Instrumentation MCQ Question Set 28
  30. Analytical Instrumentation MCQ Question Set 29
  31. Analytical Instrumentation MCQ Question Set 30
  32. Analytical Instrumentation MCQ Question Set 31
  33. Analytical Instrumentation MCQ Question Set 32
  34. Analytical Instrumentation MCQ Question Set 33
  35. Analytical Instrumentation MCQ Question Set 34
Search
Olete Team
Online Exam TestTop Tutorials are Core Java,Hibernate ,Spring,Sturts.The content on Online Exam Testwebsite is done by expert team not only with the help of books but along with the strong professional knowledge in all context like coding,designing, marketing,etc!